• 0800 8611394 | Mob: 07745 597355
  • info@envirosmartlimited.co.uk
  • Serving Scotland

Cavity Wall Insulation Edinburgh

Cavity Wall Insulation Installers in Edinburgh

Cavity Wall Insulation in Edinburgh

Cavity wall insulation is a method used to insulate walls in buildings, particularly homes, to improve energy efficiency and reduce heat loss. It involves filling the gap or cavity between the inner and outer walls of a building with an insulating material. This insulation helps to keep the warmth inside during cold weather and prevents excessive heat from entering during hot weather.

Cavity-wall-inslation-scotland
Image showing cavity wall insulation

How does cavity wall insulation work?

Here’s how cavity wall insulation works:

  1. Identification of Cavity Walls: Not all walls have a cavity. Homes built after the 1920s and before the 1990s are more likely to have a gap between the inner and outer walls.

  2. Drilling Holes: Small holes are drilled into the external wall at regular intervals, usually from the outside of the building.

  3. Injecting Insulating Material: An insulating material, often foam, mineral wool, or polystyrene beads, is injected into the cavity through the holes. The insulation material is chosen for its thermal properties, meaning its ability to trap and retain heat.

  4. Sealing Holes: After the insulation material has been injected, the holes are sealed, leaving little evidence of the process.

Cavity Wall Insulation Installers Edinburgh

Envirosmart Limited no longer installs cavity wall insulation in Edinburgh. Scottish properties are not well suited for cavity wall insulation, due to there many so many historic and victorian buildings with no cavity in place.

This is because of issues that occur after installing cavity wall insulation, we advise on other types of insulation that are more effective and risk averse.

Other types of home insulation we install include loft insulation, underfloor insulation, internal wall insulation, external wall insulation, roof insulation and room in roof insulation.

Reasons Not To Install Cavity Wall Insulation

While cavity wall insulation can offer several benefits, there are also situations where it might not be suitable or advisable to install it. Here are some reasons not to install cavity wall insulation:

  1. No Cavity Walls: If your house does not have a cavity between the inner and outer walls, then cavity wall insulation is not applicable. Many older or traditional buildings in Scotland will most likely not have cavities.

  2. Existing Insulation: If your cavity walls are already insulated and the insulation is in good condition, there’s generally no need for additional insulation. Insulating over existing insulation can create moisture problems.

  3. Cavity Width: If the cavity is too narrow or irregularly shaped, it might be challenging to effectively fill it with insulation material. Insufficient insulation could lead to thermal bridging and decreased effectiveness.

  4. Damp Issues: If your property is prone to dampness or has issues with water penetration, installing cavity wall insulation can exacerbate the problem. It might trap moisture within the walls, leading to damp and mold issues.

  5. Structural Problems: If your property has structural issues, such as deteriorating mortar or unstable walls, installing cavity wall insulation might not be advisable. It’s crucial to address structural problems before considering insulation.

  6. Cost vs. Savings: In some cases, the cost of installing cavity wall insulation might not justify the potential energy savings, especially if you live in a mild climate or your energy consumption is already low.

  7. Heritage or Listed Buildings: Regulations and restrictions might apply to historic or listed buildings, preventing modifications to the original structure, including cavity wall insulation. Always check with local authorities if you live in such a property.

Before deciding to install cavity wall insulation, consult with our insulation installers to discuss your needs and wether there is a better long way to insulation your home.

Problems With Cavity Wall Insulation in Edinburgh

Here are the fundamental reasons why cavity wall insulation is not always suitable for homes in Edinburgh:

  1. Property Suitability: Not all homes in Scotland have suitable cavity walls. Older properties, in particular, might lack cavities or have cavities that are unsuitable for insulation. A professional assessment is necessary to determine whether your property is suitable for cavity wall insulation.

  2. Dampness Consideration: Scotland’s climate can be damp, and some areas are prone to high rainfall. It’s essential to address any existing damp issues before installing cavity wall insulation, as trapping moisture inside the walls can lead to further problems.

  3. Building Regulations: You need to check local building regulations before installing cavity wall insulation in Edinburgh. Planning permission is often not granted in certain parts of the country.

Video from Skill Builder showing some of the problems with cavity wall insulation

CAVITY WALL INSULATION SERVICE IN EDINBURGH

Envirosmart Ltd - sustainable cavity wall insulation in Edinburgh

We are cavity wall insulation and renewable energy experts that only use the best environmentally friendly materials with all of the installations conduct. Our approved installers have vast experience with all aspects of home energy efficiency programmes as advised by the Energy Savings Trust.

Loft, Roof, Wall & Underfloor Home Insulation

We specialise in:

  • - Therma fleece, sheeps wool insulation.
  • - Knauf Earthwool and Rockwool insulation.
  • - SuperQuilt multifoil insulation.

PIR Insulation Boards

A grade insulation, thin, light, durable, stable, humidity proof, pressure resistant and compliant in building regulations.

Envirosmart Limited Scotland
Proudly partnered with and trusted by...​
Envirosmart-Logos
Testimonial

What our clients say about us

Insultation in Scotland



Initially we contracted Craig and his team to provide insulation for two attic rooms which are either freezing or much too hot and they ended up fitting a new kitchen too.
We can't recommend this firm highly enough, especially for the way they helped us through the unexpected discovery of damp.

Communication and customer service were excellent; friendly helpful worker were punctual, hardworking and cleaned up thoroughly.
Highly recommended.
Sara O'Hara
Carolyn O'Hara
Scotland
Our Team

Cavity Wall Insulation Installers serving Edinburgh

Craig Maxwell - Envirosmart Limited

Craig Maxwell

Director

Allan Hughes - Envirosmart Limited

Allan Hughes

Installation Manager

Fraser Hughes - Envirosmart Limited

Fraser Hughes

Installation Engineer

Callum Gordon - Envirosmart Limited

Calum Gordon

Installation Engineer

Say hello, and get a free home visit

We would be privileged to give you a free quote on the job you need doing. Get in touch today and arrange a free home visit.

    Cavity Wall Insulation Company near Edinburgh

    Envirosmart-insulation-installers-ayrshire

    We are an Ayrshire based insulation company, initially launching from home in Ayr, successful growth year on year lead to us relocating to an industrial estate in Stewarton. Our team of installers are based in Ayrshire and Glasgow serving most of Scotland, with a quick response for local enquiries. 

    Unit 55, Magbiehill Park, Dunlop Road, Stewarton, KA3 3DX, Scotland

    0800 8611394
    Mob: 07745 597355

    info@envirosmartlimited.co.uk

    Cavity Wall Insulation Installers in Scotland

    Envirosmart Limited has dedicated teams of insulation installers ready and able to install cavity wall insulation in most of Scotland including in Argyll and Bute, Ayrshire, Clackmannanshire, Dumfries and Galloway, Dundee, East Dunbartonshire, East Lothian, Edinburgh, Falkirk, Fife, Glasgow, Greenock and Inverclyde, North Lanarkshire, Perth and Kinross, South Lanarkshire, Stirling, West Lothian and West Dunbartonshire.

    Call Now Button